Tampa Bay's Commercial Electrical Experts

Your Project
Deserves an

Electrician
Who Shows Up.

Commercial and industrial electrical contracting done right β€” on schedule, code-compliant, and built to pass inspection the first time. No excuses. No surprises.

FLState Licensed
100%Code Compliant
5β˜…Client Rated
NEC'26Code Expertise

// Active Project Capabilities

  • πŸ—οΈ
    Tenant Build-Outs
    Full electrical scope from design to final inspection
  • 🏭
    Industrial Installations
    3-phase power, motor controls, panel gear
  • πŸ”Œ
    Service & Panel Upgrades
    Switchgear, 480V distribution, load centers
  • πŸ“‹
    Permit & Inspection Management
    AHJ submittals, plan review, CO sign-off
Powering Lives
FL License #EC13014766 Β· Fully Insured

Most Electrical
Contractors Cost You

More Than They're Worth

You have a timeline. A budget. A general contractor breathing down your neck. The last thing you need is an electrician who misses pull dates, fails inspection, or disappears mid-job.

Bad electrical decisions kill project momentum. They delay your certificate of occupancy. They cost you lease revenue, client relationships, and your reputation.

You deserve a contractor who treats your project like their name is on the line β€” because it is.

🚫
Failed Inspections & Re-Submittals
NEC violations and sloppy permit packages add weeks to your schedule and thousands to your budget.
πŸ“΅
Contractors Who Go Silent
You can't get an update. You can't get a schedule. Your GC is calling you. Sound familiar?
πŸ“ˆ
Scope Creep & Surprise Invoices
A low bid sounds great β€” until the change orders pile up and the final number is unrecognizable.
πŸŽ“
Unlicensed or Under-Qualified Crews
Cheap labor on a commercial job is a liability waiting to happen β€” for you, not just them.
⚑We've Been In Your Position

You Need a Partner,
Not a Vendor

At Ohm Grown Services, we built this company around one idea: commercial and industrial clients deserve a contractor they can actually count on. Not one that's hard to reach. Not one that learns NEC on your project. A real partner who shows up, communicates clearly, and delivers.

We operate in the Tampa Bay market every day β€” tenant build-outs, industrial facilities, new construction, disaster recovery β€” and we know exactly what the city requires, what inspectors want to see, and how to keep your timeline moving.

NEC '26
Current NEC 2026 Code expertise
EC#
Florida License EC13014766
Tampa
Bay Area locals β€” we know your AHJ
Comm+
Commercial & industrial specialty only

"Ohm Grown pulled through on our tenant build-out when two other contractors bailed. They handled the permit resubmittal, scheduled the inspection, and we had our CO on time. Absolute lifesavers."

β€” Commercial Property Manager, St. Pete, FL

"We run a tight production schedule and can't afford electrical delays. Ohm Grown coordinated the 3-phase service and panel work around our line without ever shutting us down. Clean install, on budget, zero inspection comments."

β€” Operations Director, Manufacturing Facility, Tampa, FL

"As a GC, the sub I hire is a reflection of me. Ohm Grown communicates, hits their dates, and their work passes the first time β€” every time. They're the first call I make on every commercial job now."

β€” General Contractor, Clearwater, FL

Built on Trust. Proven in the Field.

Florida Electrical Contractor

⚑ License #EC13014766  Β·  Fully Licensed & Insured

Tampa Bay, FL  Β·  Serving Central Florida

Commercial & Industrial
Electrical Services

Full-scope electrical contracting for businesses, developers, and general contractors across Tampa Bay.

01
πŸ—οΈ
Tenant Build-Outs

From shell space to certificate of occupancy β€” full electrical scope. Lighting, power distribution, panel installs, specialty equipment, and permit coordination with local AHJs.

RestaurantsRetailMedicalOffice
02
🏭
Industrial Electrical

3-phase power systems, motor controls, VFDs, panel gear, gear rooms, bus duct, and MCC installations for manufacturing, warehousing, and industrial facilities.

3-PhaseMotor Controls480V Systems
03
πŸ”§
New Construction

Ground-up electrical for commercial developments. We coordinate with GCs, architects, and MEP engineers from rough-in through final trim and commissioning.

Rough-InTrim-OutCommissioning
04
⚑
Service & Panel Upgrades

Upgrading your service entrance, switchgear, or distribution panels to meet growing load demands. We handle all utility coordination and permitting.

SwitchgearService EntranceLoad Studies
05
πŸ’‘
Lighting & Energy

LED retrofits, lighting control systems, emergency egress, and energy-efficient commercial lighting designs that meet code and reduce your operating costs.

LED RetrofitEmergency EgressControls
06
πŸŒ€
Disaster Recovery

Storm, flood, and fire damage restoration. Rapid-response rewiring and system restoration for commercial and industrial properties to get operations back online.

Storm DamageRewireRapid Response

How to Get Your
Project Powered Up

Three steps. No complexity. Just results.

1
Tell Us About Your Project

Fill out our quick project form or call us directly. We ask the right questions to understand your scope, timeline, and what's at stake.

2
We Build Your Plan & Proposal

We walk the site, review drawings, and deliver a clear proposal β€” scope, schedule, and price. No vague estimates. No hidden markups.

3
We Execute. You Open.

We pull permits, manage inspections, coordinate with your GC, and deliver a clean, code-compliant install. Your project moves forward.

Every Project.
Every Day.

Zero Compromises.

At Ohm Grown Services, safety isn't a checklist β€” it's the culture we show up with every single morning. We believe the most professional job site is a safe job site, and we operate every project with that standard built in from day one.

Our crews follow OSHA 29 CFR 1926 electrical construction standards on every commercial and industrial project. That means proper lockout/tagout procedures, arc flash protection, documented safety plans, and a team that's trained to speak up when something isn't right.

⚑ Work With a Safety-First Team
🦺
OSHA 29 CFR 1926 Compliant
We follow federal electrical construction safety standards on every project β€” no shortcuts, no exceptions. PPE requirements, fall protection, and electrical hazard protocols are non-negotiable.
πŸ”’
Lockout / Tagout Procedures
Every energized work scenario is approached with documented LOTO procedures. We don't energize or de-energize systems without proper authorization and verification.
⚑
Arc Flash & Electrical Hazard Protection
Our electricians are trained in arc flash hazard awareness and equipped with appropriately rated PPE for the work being performed. We assess electrical hazards before we pick up a tool.
πŸ“‹
Job Site Safety Plans
Every project begins with a safety plan tailored to the scope and site conditions. Our foremen conduct daily safety briefings before work begins.
πŸ—οΈ
GC & Multi-Trade Coordination
We communicate proactively with general contractors and other trades to identify and mitigate shared hazards on active construction sites.
πŸ“š
Ongoing OSHA 10 & 30 Training
Our team maintains current OSHA 10 and OSHA 30 certifications. Safety training is not a one-time event β€” it's an ongoing commitment at every level of our company.
πŸ›‘οΈ
Our Commitment
No project timeline, budget pressure, or client demand will ever override the safety of our workers, your workers, or the public. That's not a policy β€” it's who we are.

READY TO GET YOUR
PROJECT ON SCHEDULE?

Talk to a licensed electrician today β€” no sales pitch, just answers.

The Cost of Choosing
the Wrong Contractor

In commercial construction, a bad electrical contractor doesn't just slow things down β€” they can derail your entire project and put you on the hook for the damage. Stakeholders, investors, tenants, and customers are depending on your timeline.

  • πŸ’Έ
    Delayed Certificate of OccupancyEvery week your space can't open costs you lease revenue, payroll, or customer goodwill you'll never get back.
  • πŸ”΄
    Failed Inspections & Stop-Work OrdersAHJ corrections and stop-work notices halt your project and cascade through every other trade.
  • ⚠️
    Unsafe InstallationsSubstandard commercial electrical work is a fire hazard β€” and a legal liability that follows the building forever.
  • πŸ—£οΈ
    Damaged Reputation with Your GC or ClientWhen your sub fails, your name is attached to that failure. Protect your professional relationships.

Imagine Your Project
Crossing the Finish Line

When you work with Ohm Grown Services, your project gets powered by a team that treats every detail like it's our license on the line β€” because it is.

βœ“
Permit issued. Inspection passed first time. No re-submittals. No corrections. Just a green tag and a clear path to CO.
βœ“
Your GC calls you with good news. Electrical is on schedule, roughed in clean, and the inspector cleared it with zero comments.
βœ“
You open on time. Your customers, tenants, and operators walk into a facility where everything works β€” because the electrical was done right.
βœ“
You call Ohm Grown for the next one. Because you know what it feels like to have a contractor you can actually trust.

// Commercial Projects We Execute

Restaurant & Food Serviceβœ“ Active
Retail & Strip Centersβœ“ Active
Warehouse & Distributionβœ“ Active
Medical & Healthcareβœ“ Active
Office & Professionalβœ“ Active
Manufacturing Facilitiesβœ“ Active
Start Your Project β†’

Serving Tampa Bay
& Central Florida

Licensed throughout Florida, with active commercial & industrial crews providing full coverage across the Tampa Bay region and Central Florida.

Hillsborough CountyPinellas CountyPasco CountyPolk CountySarasota CountyManatee CountyHernando County

Common Questions
From Commercial Clients

Yes. Ohm Grown Services holds Florida State Electrical Contractor License #EC13014766. We are fully licensed and insured for commercial and industrial electrical work throughout the state of Florida.
Absolutely β€” that's part of what makes us valuable. We handle all permit applications, plan review coordination with city and county AHJs, and schedule and attend all required inspections. You don't have to chase the city. We do that for you.
We work on commercial projects ranging from small tenant build-outs to large-scale industrial installations and multi-unit developments. If you're unsure whether your project fits, just call us β€” we'll tell you honestly if we're the right fit.
Yes β€” working as an electrical subcontractor for GCs and developers is a core part of our business. We're experienced with project schedules, RFI processes, and submittals, and we maintain the communication standards that keep your jobs running smoothly.
We serve all of Tampa Bay including Tampa, St. Petersburg, Clearwater, Brandon, Riverview, Wesley Chapel, Lakeland, Sarasota, Bradenton, and surrounding Hillsborough, Pinellas, Pasco, Polk, and Sarasota county areas.
Safety is our top priority on every project. We follow OSHA 29 CFR 1926 electrical construction standards, maintain current OSHA 10 and OSHA 30 certifications, and implement site-specific safety plans, lockout/tagout procedures, and arc flash protection protocols on every job.

Get a Free
Project Quote

Tell us about your project and we'll get back to you fast β€” usually within one business day. No pressure, no sales tactics. Just a straight conversation about what you need.

πŸ“ž
βœ‰οΈ
πŸ“
Service Area
Tampa Bay & Central Florida
πŸ›‘οΈ
FL License
EC13014766
Request a Quote